Publicidad
Idiomas disponibles
Idiomas disponibles
36
HOW TO USE
Custom program
If you have a special combination of settings that you use
frequently, you can save these settings as a CUSTOM PROGRAM.
* To Save a Custom Program:
desired cycle.
cycle.
3. Press the cycle option button(s) for the option you would like to
add. A confirmation message will be shown in the display.
4. Press and hold the CUSTOM PROGRAM button for 3 seconds.
NOTE
You may save only one custom program at a time. Pressing
and holding the CUSTOM PROGRAM button will overwrite any
previously saved custom program.
To Recall a Custom Program:
3. Press the START/PAUSE button to start the cycle.
Steam functions
To Fill the Steam Feeder
3. Fill the steam feeder just to the filter screen.
4. Place the steam feeder in the drawer; then push in the drawer
until it clicks into place.
water up to the MAX line. If not, the
sure that the steam feeder is filled with water or the drawer is fully
closed. Turn the dryer off then restart the Steam Cycle.
substances, rinse agents, or detergents.
Drawer
generator will not work.
overflow.
drawer before starting the dryer.
WARNING
injury or death.
this warning can cause serious injury or death.
Water
ONLY
Steam
Feeder
NOTE
Failure to follow this warning can cause serious
will be displayed. Make
Failure to follow
Publicidad
