strong enough to be able to withstand more than eight times the weight of
EN
the camera and its accessories.
Ensure that the power is disconnected before you wire, install, or
disassemble the camera.
Local storage
Insert a Micro SD card with up to 256GB to use the camera as an additional
recording device, or as a backup in case of failure of communication with the
network video recorder. The card is not supplied with the camera. Recorded
video and log files can be accessed via the web browser or via TruVision
Navigator.
Setting up the camera
Once the camera is mounted, set up its network and streaming parameters
so that it can be controlled over the network, and program it as appropriate
for its location. Refer to the camera's configuration manual for further
information, which is available from our website.
Technical specifications
Electrical
Voltage input
Power consumption
Miscellaneous
Operating temperature
Relative humidity
IP rating
Dimensions
Weight
8
24 VAC, Hi-PoE
24 VAC: Max. 45 W, including max. 6 W for
heater.
Hi-PoE: Max. 50 W, including max. 6 W for
heater.
-40 to +70 °C
95% or less non-condensing
IP66
Ø231 × 356 mm
Approx. 6.0 kg