Replace string cutter
Check the line cutter. Never operate
the trimmer without the line cutter or
if the line cutter is defective.
A defective line cutter must only be re-
paired by an authorised servicing agency.
Storage
•
Carefully clean the trimmer and its ac-
cessories after each use (see "Clean-
ing and maintenance"), thereby avoid-
ing mould formation.
•
Store the trimmer in a dry place well
out of reach of children.
•
Do not expose the trimmer for extend-
ed periods to direct sunlight.
•
Do not wrap plastic sacks around the
trimmer as this could result in the for-
mation of moisture and mould.
•
Do not stand the trimmer on its pro-
tective cover (
upper handle (
ner that the protective cover does not
come into contact with other objects.
This is because the protective cover
could become deformed, thereby
changing its dimensions and its safety
properties.
Disposal and protection
of the environment
Dispose of the trimmer, its accessories
and the packaging in an environment-
friendly manner.
Electrical appliances must not
be disposed of with the domestic
waste
8). Suspend it by its
1) in such a man-
Hand in a redundant trimmer to a recy-
cling centre. The plastic and metals can
then be sorted out and graded for recy-
cling. Our Service Centre will be happy to
answer any questions in this respect.
Defective units returned to us will be dis-
posed of for free.
Technical data
Electric lawn trimmer ......... FRT 450 A1
Rated input voltage..............230V~, 50 Hz
Power input..................................... 450 W
Idling speed ............................10300 min
Weight ............................................2.2 kg
Dual line................2 x 5 m, fully automatic
Cutting circle dual line ................. 290 mm
Line thickness dual line ................ 1.4 mm
Protection Class .................................
Protection category ........................... IP20
Sound pressure level
(L
) .................74.5 dB(A), K=2.13 dB(A)
pA
Sound power level (L
guaranteed ............................ 96 dB (A)
measured ........ 94.5 dB(A); K=1.9 dB(A)
Vibration (a
) at the
n
upper handle ........ 5.880 m/s
additional handle . .. 2.904 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
GB
MT
)
wA
,
m/s
2
K=1.5
;
m/s
2
K=1.5
-1
II
2
2
49