Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
When work has been completed, clean the tool to allow smooth functioning of the tool over
time.
Always use only a soft, dry cloth to clean your tool; never use detergent or alcohol.
Always wear safety goggles when cleaning tools with compressed air.
TROUBLESHOOTING
WARNING: Place the trigger switch (F) in the OFF position and remove the battery before
performing troubleshooting procedures.
PROBLEM
Tool does not work.
Motor overheating
WARRANTY
For 5 years from the date of purchase, the circular saw is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery capacity.
The battery pack is not
inserted properly.
Ventilation slots are
obstructed
CORRECTIVE ACTION
Charge the battery pack.
Install the battery pack into the tool
correctly.
Clean and clear the ventilation
slots. Do not cover the ventilation
slots with your hand during
operation
14
Lowe's Home Centers LLC.
Mooresville, NC 28117
Printed in China
Publicidad
