Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
Only use salt specially formulated for domestic dishwashers.
Do not use table salt as it contains insoluble substances which may damage the water
softening system.
Fill the salt container before starting the washing programme. In this way, the excess
saline solution will be immediately removed by the water; the prolonged presence of salt
water inside the tank may lead to corrosion.
If you plan to use dishwasher tablets for your washing needs, then you do not require to
use salt or rinse agent but please note that the refill salt indicator light
illuminated on the control panel. This is quite normal and will not affect the operation of
your dishwasher.
Adjusting the salt consumption
1. Open the door and switch on the dishwasher.
2. Enter the status of adjusting the salt consumption by pressing and holding
indicator lights
3. While the two indicator lights are flashing, repeatedly press
setting to suit the water hardness.
4. Press
to confirm the setting.
WATER HARDNESS
°dH
°fH
°Clarke mmol/l
0~5
0~9
0~6
6~11
10~20
7~14
12~17
21~30
15~21
18~22
31~40
22~28
23~34
41~60
29~42
35~55
61~98
43~69
and
flash.
Illuminated
indicator light
0~0.94
45
1.0~2.0
65
2.1~3.0
65
45
Eco
3.1~4.0
45
Eco
4.1~6.0
45
45
Eco
6.1~9.8
45
65
will remain
P
P
to adjust the desired
Salt consumption
(gram/cycle)
0
9
12
20
30
60
until the
1 6
Publicidad
