Proline FBI 49 DWP Manual De Instrucciones página 49

Starting the Dishwasher
1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.
 Ensure they are clean and properly positioned. See "Cleaning and maintenance"
section.
4. Check that there is rinse aid and salt.
5. Load the dishes.
 Ensure that the spray arms can rotate freely.
6. Add the required amount of detergent into the dispenser according to the "Washing
Programmes" chart.
7. Press to switch on the dishwasher.
P
8. Repeatedly press to select the desired washing programme.
 The corresponding programme indicator light will illuminate.
60 55
 Delay timer: The delay timer allows you to delay the start of a washing programme
by 3 hours, 6 hours or 9 hours.
Repeatedly press
Once the delay timer has been set, close the dishwasher door to activate the function.
The corresponding start delay time indicator light will flash.
9. Close the dishwasher door securely.
 The washing cycle will start.
10. At the end of the washing programme, the dishwasher will buzz and automatically
stop.
11. Wait for about 15 minutes before you open the dishwasher door in order to avoid
burns.
12. Unload the dishes.
Eco
45 65 45
until the desired start delay indicator light illuminates.
2 0