Primer DSC-11 Manual De Uso Y Mantenimiento página 58

The technical specifications for each model are specified in the following table:
MODEL
Drum volume
Capacity (Rel. 01:20)
Capacity (Rel. 01:25)
Capacity (Rel. 01:30)
Drum diameter
Drum depth
Drum motor
Fan motor
Electrical heating power
Electrical power. Heat pump
Total electrical power
Net weight
Noise emissions
2.1. Components
Machine control:
The machine is controlled using an electronic microprocessor able to control the activation and
deactivation of each system. Communication with the user is carried out using a keypad, with a
display on the front top part of the machine.
The microprocessor has 9 programmes in it that the user can use.
A digital temperature sensor, located in the lower part of the dryer, is used to keep the
temperature constant in the inside of the dryer. The required temperature is regulated using the
aforementioned electronic control and allows us to change values from 20 to 70 ºC to work with
the optimum temperature for each type of fabric.
Two digital temperature sensors and three more pressure switches are used to check that all the
system is operating correctly.
A humidity sensor monitors the residual humidity in the system at all times, adjusting the drying
time and the drum speed, to maximise efficiency.
Time control is internally carried out in the microprocessor.
The anti-crease cycle is automatically activated at the end of each cycle (Drying + Cool-Down).
The microprocessor has some signals incorporated that indicate the need for cleaning the filter.
Heating:
The machine has a dual heating system, the heat pump and a system of electrical resistors. The
electronic control combines both systems in order to maximise efficiency and minimise drying
time.
DSC-11
L 210
kg 10.5
kg 8.4
kg 7
mm 750
mm 475
kW 0.37
kW 0.55
kW 4
kW 3.8
kW 8.77
kg 342
dB 64
DSC-17 DSC-23
330 460
16.5 23
13.2 18.4
11 15.3
750 855
746 800
0.37 0.37
0.55 0.55
4 4
3.8 3.8
8.77 8.77
357 380
64 65
58