Primer DSC-11 Manual De Uso Y Mantenimiento página 72

4.4. Information displayed
The display offers different types of information, including the programme number, the time
remaining, the percentage humidity and the temperature setting. The information may vary
according to the state of the machine at any moment.
Each time the machine is powered, the first screen that appears, after displaying the software
versions, is a 5 minute countdown of the compressor crankcase preheating. During these minutes
no drying cycle can be executed. Once the waiting time has elapsed, the machine can be used
normally.
PREHEATING
PLEASE WAIT
300
When the machine is operating, the % symbol flashes.
When the electrical heating is ON, a small arrow pointing upwards appears next to the
temperature description.
When the heating using the heat pump is ON, the outline of a large arrow pointing upwards
appears next to the temperature description.
When the electrical heating and the heat pump are both ON, a large arrow, as shown in the
figure, is displayed.
72