Primer DSC-11 Manual De Uso Y Mantenimiento página 62

3. INSTALLATION
Install the machine according to current regulations
3.1. Location
3.1.1. Transport and storage
The machine must be transported always on its pallet and original packaging to guarantee its
integrity. Transport the machine to the definitive work place.
Remove the packaging and make sure that it has not been damaged during transport.
In no event install or keep the dryer outdoors.
If the machine has to be stored for a long time, cover it with its original packaging to protect it
from external agents and keep it in the optimum environmental conditions. It should also be
disconnected it from the mains power network and all connections closed.
 Minimum storage temperature: 5 ºC.
 Maximum Relative Humidity: 90%.
3.1.2. Location
Install the machine in a big room to obtain efficient work conditions and to guarantee the sufficient
ease of movement of the workers using the machine.
The definitive position of the machine must allow its correct use. The distances indicated on the
following drawing must be observed to allow correct maintenance by the authorised staff.
Minimum operating space. 1.50 m at the front, and rest according to diagram.
62