Publicidad
INSTALLATION INSTRUCTIONS
These instructions are for a specialized installer and are a guide for
the installation process, regulations and maintenance in accordance
with the law and current standards.
If the built-in oven or any other appliances that produce heat, need
to be installed directly underneath the cooking hobs in ceramic
glass, IT IS NECESSARY THAT THE APPLIANCE (oven) AND THE
COOKING HOBS IN CERAMIC GLASS ARE ADEQUATELY ISOLATED, in
such a way that the heat generated from the oven, measured on the
right hand side of the bottom of the cooking hobs, does not exceed
60°C.
Failure to follow this precaution, could cause a malfunction in the
TOUCH CONTROL system.
Positioning
The domestic appliance was built in order to be encased on a work
surface, the way it is illustrated in the graph (Fig.1). Predispose
sealing material (Fig.2) along the Whole perimeter (for dimensions of
the cut see Fig.1). Lock the domestic appliance into place with 4
supporters, keeping in mind the width of the surface (Fig.4). If the
lower part of the appliance after installation, is accessable via the
lower part of the furniture, it is necessary to mount a separating
panel keeping in mind the distances indicated (Fig.3).
Ventilation
The distance between the cooktop and built-in kitchen's furnitures
or cooking apparatuses must guarantee suficiente ventilation of the
air (Fig.3). Not to use the cooktop if in the oven is in course the
pyrolysis process.
POR
E L A N T O - N A T O I N I T A L I A
74
Publicidad
