Descargar Imprimir esta página

Elanto RAISE-LNTP952DINAGV2 Instrucciones De Uso Y De Montaje página 92

Publicidad

A distance of at least 15 cm must be left between any object,
stored in the same cabinet Where the appliance is installed, and
the lower part of the induction hob. In fact, the airflow coming
from the cooling system in the lower part of the induction hob
must not be hindered.
Do not modify or try to modify the characteristics of this
appliance, as this is dangerous.
Any repair must be carried out by authorized personnel. The
hoods must always be disconnected from power supply before
performing any cleaning or maintenance operation.
The controls locking device must be used to prevent children
from accidentally turning on the appliance or switching its
functions. The appliance must never remain unattended while it
is operating.
Should the product show any anomaly, disconnect the appliance
from the power supply.
Before carrying out the installation of the appliance, please
check that all components are not damaged. In such a case, make
contact with your retailer and do not proceed with the
installation.
Do not try to modify or repair the appliance, as this might entail
great Danger.
The grease filter can be washed either by hands or in the
washing machine. The filters ar to be cleaned according to the
use, but at least once every two months .
The charcoal filter must be replaced according to the use, but at
least once every six months.
POR
E L A N T O - N A T O I N I T A L I A
92

Publicidad

loading