Publicidad
Switching a cooking zone ON
Select the desired cooking zone and press or slide on the
corresponding slidebar (D).
The power of the single cooking zone can be adjusted in 9 different
positions and will be shown on the relative luminous display with a
level from «1» to «9».
Slide right on the slidebar to increase the power level, slide left to
decrease it.
Bridge (Flexible cooking zones)
This function allows you to combine the front cooking zone to the
rear cooking zone to create one large zone (zone 1+2 and 3+4, Fig. 8).
Pay attention in placing the cookware in the correct position on the
cooking zones.
To activate the Bridge function press simoultaneously on both
Sliderbars of the two adjacent cooking zones. The bridge luminous
symbol
will appear on the side of the two cooking zones
display indicating that the function is active. Now it is possible to set
the heat level of the bridge zone.
NOTE: the settings of the brige zone are Only enabled by the front
cooking zone slidebar and sensor keys.
To disable the Bridge function press simoultaneously on both
Sliderbars of the two adjacent cooking zones. The bridge luminous
symbol
turns off.
POR
E L A N T O - N A T O I N I T A L I A
78
Publicidad
