Publicidad
Product installations
Before any installation operation is carried out, make sure that the
appliance is disconnected from power supply.
Techinical operations
Place the overturned hob on an adequate surface, preserving the
glass from any scratches. Take the filtering box from the packaging
and install it as shown in fig. 1-2, making sure to match the pins
present with the appropriate slots (fig. 3-4).
Lock the filtering box to the hob using the 6 nuts supplied (fig. 3-4)
and 2 screws for the front part (fig. 5).
Carry on the installation by securing the hob to the cabinet, as
shown in the specific user manual provided within the packaging of
the hob.
Recirculating operation (fig. 6)
Place the overturned hob on an adequate surface, preserving the
glass from any scratches. Take the filtering box from the packaging
and install it as shown in fig. 1-2, making sure to match the pins
present with the appropriate slots (fig. 3-4).
Lock the filtering box to the hob using the 6 nuts supplied (fig. 3-4)
and 2 screws for the front part (fig. 5).
Carry on the installation by securing the hob to the cabinet, as
shown in the specific user manual provided within the packaging of
the hob.
Ducting operation (fig. 7)
The air outlet of the product must be connected to the outside of the
house. The ducting to be installed from the air outlet of the product
to the outside of the house is not provided with the appliance.
POR
E L A N T O - N A T O I N I T A L I A
93
Publicidad
