User Manual; First Use - VOCO Caps Warmer Manual Del Usuario

USER MANUAL

IMPORTANT INFORMATION BEFORE

FIRST USE

1. Foreword
Thank you for purchasing this Caps Warmer. Please read this user manual
thoroughly and follow the instructions when operating the device. In addition, please
keep this user manual in a safe place close to the device for future reference.
Intended use
This device is intended for warming composite Caps, used in dentistry, to increase
flowability and improve working properties.
2. Before first use
Connect the base to the mains (100 - 240 VAC, 50/60 Hz) with the universal adapter.
Make sure the power plug is fully seated inside the base receptacle and place the
Caps tray on the base. After pressing the operating button, the indicator light on the
right glows yellow to indicate that the device is connected to the mains. The base is
equipped with a cover plate with non-stick coating which directs the heat to the tray.
3. Use
1.) Place the Caps you wish to warm in the recesses provided. For optimal warming,
ensure that the Caps Dispenser, with the inserted, unopened Cap, is securely posi-
tioned with the Cap facing downwards (in the direction of the groove). Individual
Caps warm up most efficiently when they are inserted in the recesses provided
with the Cap pointing in the direction of the central axis so that the wall of the
Caps has the largest possible area of contact with the wall of the recess.
2.) Caps Warmer has three temperature settings. Select the desired temperature by
pressing the operating button repeatedly. Depending on the clinical situation and
the desired consistency, the 54 °C (130 °F) or 68 °C (155 °F) temperature setting
is recommended.
The indicator light on the left shows the selected temperature as follows.
4