VOCO Caps Warmer Manual Del Usuario página 5

Operating button
Press once
Press twice
Press three times
3.) After selecting the desired temperature setting, Caps Warmer needs approx.
15 - 20 minutes to heat up. During the heating process, the indicator light on
the left flashes in the colour of the selected temperature setting. When it changes
to a steady light, the temperature setting has been reached.
4.) After warming the Caps (approx. 3 minutes), apply the material within 30 seconds.
5.) The Caps Warmer is intended for brief warming of Caps immediately prior to
application. Longer warming beyond the treatment period may damage the mate
rial and should therefore be avoided.
6.) To switch off the device, hold down the operating button for 2 seconds. The
device automatically switches off after 10 hours if it is not used.
4. Safety precautions and maintenance / disinfection
1.) Safety precautions
Warning: Caps Warmer becomes hot during operation. Do not touch any hot
surfaces. The Caps tray has plastic rings for handling. If the tray is removed,
the base should be switched off (hold down operating button for 2 seconds) so
that the cover plate cools down.
2.) Maintenance / disinfection
a) A plastic spatula should always be used to remove composite to avoid
scratching the non-stick surface.
b) Disinfection of Caps tray: The Caps tray is autoclavable, or can be wiped with
a cloth and disinfectant.
c) Disinfection of base: The base is not autoclavable. A cloth lightly moistened
with disinfectant should be used to clean the plastic housing after it has cooled
and while it is disconnected from the mains. Do not spray!
Indicator light (left)
Green
Orange
Red
USER MANUAL
Temperature setting
37 °C (98 °F)
54 °C (130 °F)
68 °C (155 °F)
5