Publicidad
Idiomas disponibles
Idiomas disponibles
Press the R key. Shall the "HIGH VOLTAGE" light indicator C will
9.
be on, indicating that the equipment internal generator is applying the
selected High Voltage to the element being tested. The = LED will
turn off.
10. For a few seconds, the auto-range smart system will search for the
most convenient range for the value being measured. Meanwhile, the
display will show the message:
11. Then, the display will show during a few seconds, the test number
and then the measurement result using both digital (measurement
value and unit) and analogue displays.
12. If, for example, the measure value was 601 MΩ with 1000 V voltage
test, it will be read.
13. If the measured value exceeds 1 TΩ @ 1 kV, it will be read the
following message:
25%
50%
75%
100%
25%
50%
75%
100%
25%
50%
75%
100%
25%
50%
75%
100%
17
Publicidad
