Publicidad
Idiomas disponibles
Idiomas disponibles
Accessing the basic settings
The hob should be turned off.
Switch on the hob.
1.
Within the next 10 seconds, press the
2.
seconds.
™‚
and
‹
light up on the display as the default setting.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
■
Dishwasher detergent
■
Abrasive products
■
Corrosive products such as oven sprays or stain removers
■
Sponges that may scratch
■
High-pressure or steam cleaners
■
Fixing malfunctions
Malfunctions are generally caused by minor faults. Before
contacting the Technical Assistance Service, ensure you have
read the following recommendations and warnings.
Indicator
Malfunction
none
The electric power supply has been cut off. Check other electrical appliances to check whether there has been a
The appliance has not been properly con-
nected following the connection diagram.
Electronic system malfunction.
The control panel is wet or an object is
flashing
"
resting on it.
* If the indicator persists, call the Technical Assistance Service.
Do not rest hot pans on the control panel.
symbol for 3
3
Measure
power cut.
Check that the appliance has been connected properly according to
the connection diagram.
If the malfunction is not resolved by the above checks, contact the
Technical Assistance Service.
Dry the control panel area or remove the object.
Press the
symbol several times until the desired function
3
3.
indicator appears.
Then select the desired setting using the Tipp control.
4.
Press the
3
symbol again for more than 3 seconds.
5.
The settings should be correctly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
The Tipp control
For cleaning the Tipp control, warm water and a little soap is
recommended. Do not use abrasive or corrosive cleaning
products. Do not clean the Tipp control in a dishwasher or in
washing up water. Otherwise, it could be damaged.
29
Publicidad
