Publicidad
Idiomas disponibles
Idiomas disponibles
ENGlIsh
MAINTENANCE
WARNING:
personal injury, turn unit off and disconnect
it from power source before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start-up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Cleaning
WARNING:
of all air vents with clean, dry air at least once a
week. To minimize the risk of eye injury, always
wear ANSI Z87.1 approved eye protection when
performing this procedure.
WARNING:
harsh chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get
inside the tool; never immerse any part of the tool into
a liquid.
Accessories
WARNING:
those offered by BLACK+DECKER, have not been tested
with this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory,
please contact the nearest BLACK+DECKER or visit us at www.
blackanddecker-la.com
Replacing Guard (Fig. C)
WARNING:
without guard firmly in place. Damage or personal
injury could result.
Remove Current Guard
1. Remove the guard screw
2. Slide the guard
13
off.
Assembling the New Guard
1. Slide the guard into place as shown in Fig. C.
2. Replace and securely tighten the guard screw
28
To reduce the risk of serious
Blow dirt and dust out
Never use solvents or other
Since accessories, other than
Never operate appliance
15
shown in Fig. C.
15
.
Repairs
WARNING:
and RELIABILITY, repairs, maintenance and adjustment
(including power cord repairs, and brush inspection
and replacement, when applicable) should be
performed by a BLACK+DECKER factory service center
or a BLACK+DECKER authorized service center. Always
use identical replacement parts.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed
of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further use
to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use
of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
To assure product SAFETY
Publicidad
