Black and Decker GH710 Manual De Instrucciones

TRIMMER / EDGER
iNSTRUCTiON MANUAL
Model Number GH710
PLEASE READ BEFORE RETURNING
THiS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKAN DDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri
to speak with an agent.
Please have the catalog number available when you call.
SAVE THNS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
POUR LE FRAN(_AIS, VOIR LA COUVERTURE ARRIERE.
INSTRUCTIVO DE O.PERACION, CENTRO.S DE SERVICIO Y
POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
o
1
Model No. GH710
KEY INFORMATION YOU SHOULD KNOW:
o The guard must be installed before trimming or edging - if
not, the motor will overheat (page 5).
o When replacing the line, use only .065 inch diameter
ROUND line (B&D Model No. DF-065 is recommended) -
otherwise the tool will not function properly (page 8).
o Do not bump the feed head against the ground - it will
disrupt the feed mechanism.
Always use the cord retention feature (page 7).