Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL INSTALLATION
1. Remove the fan motor assembly (E) from the
mounting plate hook, and engage the key
holes on the fan motor assembly (E) with the
two mounting plate screws with lock washers
(I) previously loosened.
Install the two mounting plate screws with
lock washers (I) previously removed, and
tighten all four mounting plate screws with
lock washers (I).
Raise up canopy ring (B) and line up the four
tabs with the four grooves on the fan motor
assembly (E). Once lined up, slide the
canopy ring (B) up to the fan motor assembly
(E) until snug.
WARNING: To reduce the risk of personal
injury, do not insert foreign objects between
rotating fan blades (C).
2. Insert the blade (C) through the slot on the
motor. Align the holes on the blade (C) and
the fan motor assembly (E) and secure the
blade in place with blade support plate with
screws and lock washers (D) provided.
Repeat this process to attach the other
blades (C).
1
2
10
Grooves
Tabs
Publicidad
