Publicidad
Idiomas disponibles
Idiomas disponibles
INITIAL INSTALLATION
1. Turn off circuit breakers and wall switch to the
fan supply line leads.
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
2. This fan can be mounted as a flushmount on
a regular (no-slope) ceiling only.
Check to make sure blades (C) will be at least
30 in. from any obstruction and at least 7 ft.
above the floor.
3. Remove two of the four mounting plate
screws with lock washers (I) from the
mounting plate (A) and loosen the other two
screws with lock washers (I). (Do not
remove.)
1
2
3
7
30 in.
min.
7 ft.
min.
Publicidad
