External Video Source - Bosch CAD 12 Instrucciones De Manejo

External video source | Video source for the driver

External video source

You can connect an external video source, such
as a TV tuner, to this device via chamber D of
the ISO connector (pins D1 and D2).
Note:
If the external source also provides
audio signals, connect the audio
output of the external source to a
suitable audio input such as AUX-IN
via chamber C3 of the ISO connector
(pins 18 to 20).
You can select an external video source with
the SRC C button. The display shows "EXT
VID".
Note:
A black screen is displayed if no
external video source is connected or
if the video source is switched off.
Robert Bosch Car Multimedia GmbH
Video source for the
driver
You can display the picture from connected
cameras on a cockpit monitor (e.g. 7" Cockpit
Display) via a Camera Switch (optional) or a
Video Box (optional). These cameras can be
used, for instance, to provide a rear view out of
the bus or for cabin surveillance. Furthermore,
an additional video source can be connected,
such as the map display of a navigation system.
To display the camera and video pictures on
the cockpit monitor,
f press the CAM button K.
To switch between various cameras and video
while a picture is being displayed,
f press the CAM button K once or several
times.
7 620 210 015/020-022 | 06.2015
en | 57