FAFREES F26 CarbonX/M Manual Del Usuario página 18

REMOVING THE BATTERY
To remove the battery from the bike, insert the key and turn to the unlocked position. When the battery is
completely locked, you can feel resistant while turning the key.
F26 CarbonM
Use caution to avoid damage to battery connector terminals, which are exposed when
the battery is unlocked and removed from the frame of the bike. In the case of damage
to the terminals or battery mounts, please discontinue use and contact Fafrees Support
immediately.
INSTALLING THE BATTERY
Ensure the battery is turned off.
DO NOT force the battery into the tray; slowly align and gently push the battery down into the tray. Then
push the battery in (make sure you push hard enough) and hear the "CLICK" sound. Slightly turn the key
to feel if there's resistance from the key. If you can feel the resistance, then the battery is completely
locked.
Make sure there is no spaced between battery and tray.

Ensure the battery has been properly secured to the bike before each use by carefully pulling

outwards on the battery with both hands once locked.
TIRE INFORMATION
F26 CarbonX/M uses 26" x 4.8" rubber tires with inner tubes. The tires are designed for durability and
safety for regular cycling activities and to be checked before each use for proper inflation and condition.
Proper inflation, care, and timely replacement will help to ensure that your bike' s operational
characteristics will be maintained, and unsafe conditions avoided.
Fafrees recommends 5-30 PSI for the stock tires on F26 CarbonX/M. Always stay within the
manufacturer' s recommended air pressure range as listed on the tire sidewall.
It is critically important that proper air pressure is always maintained in pneumatic tires.
Do not underinflate or overinflate your tires. Low pressure may result in loss of control,
EN
F26 CarbonX
15