Descargar Imprimir esta página

WUBEN A1 Manual Del Usuario página 12

Publicidad

at the same time for 5 seconds. When the red and blue lights on the
flash alternately, press the
seconds. It can be paired, otherwise the pairing is unsuccessful.
Warnings
Please read user manual carefully before using the product.
Product will generate heat while working, the light head may be 90℃ when it's in
High mode. Please do not touch it and be cautious with that to avoid any possible
harm.
Please don't flash into eyes directly to avoid harm to eyes.
Please keep the product away from children.
Please use WUBEN or WUBEN recommended batteries.
Please don't disassemble the product or it will not be covered by WUBEN warranty
policy.
Please don't throw the product into fire.
This is not a diving product, please don't use it underwater for a long time.
Maintenance
The O-Ring may be damaged after a long time use, please replace the O-Ring in
time to ensure the waterproof level of the product.
Please use WUBEN battery or WUBEN recommended batteries.
When the product indicates low power, please charge or replace the battery in
time to avoid affecting the durability of the battery.
Please use alcohol and rag to clean the conductive parts of the product in time.
When not in use for a long time, please remove the battery to prevent the battery
from leaking or exploding.
Please store the product in a dry and ventilated place.
FAQs
Problems
Causes
Check if the switch is locked
Check if the switch is turned on correctly
Abnormal
Check if it is assembled in place
flash or
failure to
Check if the battery is no power
turn on
Check if the battery is reversed
Check if the conductive position is dirty
switch of the remote control switch within 30
- 08 -
Solutions
Unlock the switch
Turn on the switch
Tighten the assembly parts
Try the battery on other products
Remove the battery and reassemble it
correctly
Clean the surface with alcohol
switch

Publicidad

loading