Shure Microflex MX396 Manual Del Usuario página 5

Cable
The MX396 comes with a 20 ft. attached, unterminated cable.
Wire Color Function
White Mic 1 Audio +
Green Mic 1 Audio −
Orange Mic 2 Audio +
Blue Mic 2 Audio −
Yellow Mic 3 Audio +
Gray Mic 3 Audio −
Red SWITCH OUT
Black LED IN
Silver Logic Ground
(non-insulated)
Shield Mic Common
Ground
Phantom Power
Each element in the microphone requires 12 to 48 V phantom power.
The LED also uses phantom power, and dims slightly when phantom
power voltage drops below 48 V DC.
The Tri-element model draws 22 mA at 48 V. The Dual-element mod-
el draws 19 mA at 48 Vdc. (Each element draws 3 mA and the LED
draws 13 mA, distributed equally among each element.)
Accessing the DIP Switches
Caution: Failure to reinstall the setscrew will reduce RF immunity.
DIP Switch Settings
DOWN (Default) UP
Momentary Toggle
Push-to-Mute Push-to-Talk
Mute button enabled, Disable mute button
LED illuminates when (microphone always
mic is active on), logic controls LED
Full Frequency Range 6dB/octave Low Cut
Filter
All manuals and user guides at all-guides.com
Mic Element
A
B
C (TRI models)
All
NOTE: Do not connect multiple elements in parallel to a single mic
input. The phantom power current draw could exceed the maximum
allowable for one mic input.
5