Seiko SII IP-6620 Guía De Consulta Rápida página 28

Printer rear (supply side)
• Exhaust attachment (option)
Installation locations
• USB connector
Used to connect the printer to a
computer.
• Power inlet
Connect the power cable to
the power inlet.
• Printer power switch
• Media holder
To be installed at both ends of
the roll media.
• Media stand
Temporarily supports the media
during loading and removal
procedures.
Can be used also when moved to the
TUR unit side.
• Media jack
Lifts or lowers the media during loading and removal
procedures.
Can be used also when moved to the TUR unit side.
• Caster
Set the lock to OFF when moving the printer and set the
lock to ON when locking the printer.
• Take-up direction switch
A lever used to fixe or release the media.
Moves together with the pressure roller lever at the
printer front side.
27