Publicidad
Idiomas disponibles
Idiomas disponibles
Printer interior
• Carriage
Houses the print heads inside, and
prints image with scanning media.
• Platen
Transports media.
The platen incorporates suction
fans and print heater to cure the ink.
• Media edge guard
Protects print heads from
being damaged by the curling
or feathering media edge.
Printer heater unit
The printer is equipped with three heaters for ink fusing and image quality stabilization.
• Afterheater (finishing)
Dries ink to stabilize print quality.
* These three heaters are controlled independently.
The temperature of the heaters can be controlled from the operation panel, the RIP software and Cp_
Manager.
WARNING
Do not touch these heaters to avoid burn as they become hot.
28
Media
• Wiping unit
Removes foreign substances on
the print head's nozzle surface.
• Print heater (front)
Penetrates ink into media to fuse the ink.
• Preheater (rear)
Preheats media.
• Capping unit
Prevents the print head's nozzles
from drying.
• Ink tray
Supports ink cartridge setting.
Publicidad
