Publicidad
Idiomas disponibles
Idiomas disponibles
Nozzle print
1
PRINTER READY
01: PAPER / 1626mm
2
NOZZLE PRINT
PRINT?
3
NOZZLE PRINT
EXECUTING
4
Example of nozzle print pattern
5
Missing lines are found
NG
Example when lines for nozzles 24 and
133 are missing in the printout.
* If lines are missing or bent lines are found on the the
nozzle print pattern, perform normal cleaning and
repeat the procedure starting from step 1.
Press the PH.RECOVERY key to perform normal
cleaning.
If the same problems occur even after normal
cleaning, set nozzle map for the defective nozzle
numbers following the procedure from step 6.
40
Bent lines are found
NG
Example where the line of nozzle
159 is bent.
The line printed by the nozzle 159
(shown with the arrow) is bent
toward the line of nozzle 161.
6
PRINTER READY
01: PAPER / 1626mm
7
ADJUST
2NOZZLE PRINT
8
>NOZZLE PRINT
2Lc
9
>>NOZZLE PRINT Lc
2#01:***
10
>>Lc:#01
2 *** g 133
,
11
>>Lc:#01
2133g133
* If several lines are missing or several bent lines
are found, repeat the procedure to set nozzle
map for all defective nozzles.
,
,
,
,
,
,
,
,
,
Publicidad
