Publicidad
Idiomas disponibles
Idiomas disponibles
Tool Specifications
Marble cutter
Model No.
Rated input power
Rated voltage
No-load speed
Diamond cutting discs Ø
Mounting hole
Cutting depth at 90°, max.
Net weight
Safety class
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
The values given are valid for nominal voltages [U] of 220/240 V. However, these values can vary for lower voltages and
models made for specific countries.
Tool Elements
The numbering of the tool elements refers to the
representation of the tool on the graphics page.
While reading the operating instructions, unfold
the graphics page of the tool and leave it open.
1 On/Off switch
2 Locking button for On/Off switch
3 Handle
4 Cutting depth scale
5 Winged screw for cutting depth setting
6 Safety Guard
7
Base plate
8
Mounting flange
9
Diamond cutting disc
* Not all the illustrated or described accessories are
included as standard delivery.
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
is read completely and the in-
structions contained therein are
strictly followed. Additionally,
the general safety instructions either in the
enclosed booklet or those added in the center
of these operating instructions must be ob-
served. Before using for the first time, ask for
a practical demonstration.
4|English
MC14008 MC14008-6
(ISRAEL Plug)
1400W
220-240V~50/60Hz
13000/min
110x20mm
20mm
34mm
3.0kg
MC14008-8
MC14008S
(BS Plug)
(SAA Plug)
Wear protective glasses and ear protection.
Wear additional protection equipment for your
safety, such as protective gloves, sturdy
shoes, hard hat and apron.
If the cable is damaged or cut through while
working, do not touch the cable and pull the
plug immediately. Never use the machine if the
cable is damaged.
Always direct the cable to the rear away from
the machine.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assis-
tance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
Hold electric tools by their insulated han-
dles whenever they could possibly touch a
hidden wire or their own cords.
Touching a "live" wire can transfer the voltage
to the exposed metal parts of the tool and give
the operator an electric shock.
Observe the manufacturer's instructions for
mounting and operating the diamond cutting
discs.
Only use diamond cutting discs with a maxi-
mum permissible speed that is at least as high
as the no-load speed of the machine.
UMC14008
1400W
110-120V~60Hz
13000/min
4-3/8˝x25/32˝
25/32˝
1-3/8˝
3.0kg
Publicidad
