6
SAFETY INSTRUCTIONS
• The indoor/outdoor wiring connections must be secured tightly,
and the cable should be routed properly so that there is no force
pulling the cable from the connection terminals. Improper or loose
connections can generate heat or cause a fire.
• Do not connect the ground wire to a gas pipe, a lightning rod, or a
telephone ground wire.
• Use non-flammable gas (nitrogen) to check for leaks and to purge
air; using compressed air or flammable gas may cause fire or
explosion.
Operation
• Do not modify or extend the power cable. Scratches or peeling
insulation on the power cables may result in fire or electric shock,
and should be replaced.
• Make sure that the power cable is neither dirty, loose, nor broken.
• Do not place any objects on the power cable.
• Do not place a heater or other heating appliances near the power
cable.
• Take care to ensure that the power cable could not be pulled out or
damaged during operation.
• Never touch, operate, or repair the air conditioner with wet hands.
• Do not insert hands or other objects through the air inlet or outlet
while the air conditioner is operating.
• Make sure that children do not climb on or hit the outdoor unit.
• Be sure to use only those parts listed in the service parts list. Never
attempt to modify the equipment.
• Do not touch the refrigerant pipe, water pipe or any internal parts
while the unit is operating or immediately after operation.