Proper Use - LUTZ B 36 Serie Manual De Instrucciones

EN
• Ensure that all work is carried out by qualified
personnel only:
- Assembly, servicing, maintenance work
- Work on the electrics
• Personnel to be trained must only work on the motor
under the supervision of technical personnel.
• Personnel holding the motor in their hands during
operation will be subjected to vibrations. The upper
limbs are exposed to an acceleration of less than
8.2 ft/s² (2,5 m/s²).
Statutory warranty
• During the guarantee period, obtain the manufac-
turer's permission for modifications, maintenance
work or alteration.
• Use only original parts.
Duties of the personnel
• Observe the notices on the motor and maintain them
in a legible state.
• Use protective equipment where necessary.
• Only perform work on the motor during downtime.
• Ensure that the motor is disconnected before you
carry out assembly and maintenance work.
• After completing all the work on the motor, remount
the safety devices in accordance with specifications.
6

2.2 Proper use

• The motor may only be installed in an upright
position.
• Observe operating limits.
• The motor may only be operated with a pump tube.
If the product and supplied accessories are used for
other purposes than the intended purpose, it is the
responsibility of the user to check the suitability and
admissibility. Product use not confirmed in writing by
the manufacturer absolves the manufacturer of any
liability.
The manufacturer is not liable for consequences of
incorrect treatment, use, maintenance, servicing and
operation of the appliance, as well as normal wear and
tear. The same applies if faults arise from modifications
or configurations on the part of the user not authorized
by the manufacturer.
Prevention of obvious misapplication
(examples)
• Do not use the motor in or on swimming pools,
garden ponds or similar locations.
• Do not immerse the motor in the liquid being
pumped.
• Do not use for pumping flammable liquids.
• Do not operate the motor in explosion hazard area.