Zonair3D AIR+ 600i Manual De Usuario página 21

Welcome
Thank you for choosing Zonair3D
600i. Please take a few minutes to read this manual before starting to use your
Zonair3D equipment in order to familiarise yourself with its operation.
TM
Getting started
GENERAL SAFETY INSTRUCTIONS
Air+ 600i is a portable air purification equipment with tested filtration efficiency.
It has three filtering stages: G4 pre filter, H14 absolute Hepa filter and the unique
GRSystem by Zonair3D
components. It is therefore important that you carefully read the following safety
instructions before use.
· This equipment should not be used by people with reduced physical or mental
abilities without assistance or supervision.
· It is not a toy. Children should not use this equipment unless supervised by
an adult.
· Do not block the Air+ 600i air intake nor the air outlet from the Air+ 600i.
· Do not spill water or other liquids on the equipment.
· Do not switch on the equipment if any of the electrical components is damaged
or not operating correctly.
· If the power cord is damaged or broken, it can be replaced by a male/female
power cord such as those used for computers or similar equipment.
· Remember to switch off the equipment before unplugging it from the power
socket.
· Do not operate inside the unit, unless for filter replacement (refer to Maintenance
instructions). Any other operation must be carried out by personnel authorised by
Zonair3D .
TM
· Before disassembling any panel, check that the unit is not switched to the electric
power network.
· Only use filters supplied by Zonair3D
Positioning
· Position the equipment in a large, ventilated space.
· Do not position the equipment on a soft surface.
Always position the equipment on a flat, stable surface.
and congratulations on your purchase of Air+
TM
for gas removal. This equipment includes electrical
TM
.
TM
21 | Air+ 600i