Zonair3D AIR+ 600i Manual De Usuario página 26

1- To access inside, unscrew the
8 M4 Philips screws
GRSYSTEM
Pre-filter
3- Identify filters
5 - After loosen the setscrews
that hold the absolute filter in
each corner, remove it by sliding
it carefully
In the event of high pollutant concentrations, filters may become clogged faster and
require a different filter replacement plan.
Please, contact Zonair3D
IMPORTANT: It is important that only original filters supplied by Zonair3D
to ensure the desired result and correct operation of the unit.
The use of filters not supplied by the manufacturer will render the warranty null
and void.
26 | Air+ 600i
Absolute
Filter
or your local distributor for replacements.
TM
2- Remove the upper panel
4 - Remove the pre-filter by
sliding it along the guides
6 - Remove the GRSystem by
sliding it
on the interior metal
are used
TM