Publicidad
Idiomas disponibles
Idiomas disponibles
Start-up
CONNECTION OF AIR+ 600i
Before connecting the equipment, check that no component is missing.
1. Locate a power supply for
connection to the Air+ 600i.
Plug the equipment to the
power suply using the power
cord.
4. Then press and hold the
upload button speed "
seconds until it reaches the value
50 and check its operation for a
few seconds.
SWITCHING OFF AIR+ 600i
After use, press the on-off button and disconnect from the power supply.
Position the equipment in a clean and dry space.
24
| Air+ 600i
2. Press the on-off button
located next to the power cord
to switch on the equipment.
5. After having checked its
" a few
operation, it is advisable to set
the regulator to its maximum
speed (Hi) for the first 10 minutes
to execute a deep cleaning of
the room.
3. Wait about 10 seconds
until the display performs the
function test. When it remains
in WAIT, press the button "ON".
It takes about 6 seconds to start
the engine.
6. Then, it is then recommended
to leave it at medium speed,
below 50, to maintain optimal
recirculation and comfort speed.
Publicidad
