Hilti SFC 14-A Manual De Instrucciones página 22

2.3 Switches
Control switch with electronic speed control
2-speed gear selector switch
Forward / reverse selector switch with safety lock
Torque and drilling mode setting ring
2.4 Grips
Vibration-absorbing grip
2.5 Lubrication
Grease lubrication
2.6 The items supplied include (toolbox versions):
1 Power tool
1 Operating instructions
1 Hilti toolbox
2.7 The items supplied include (cardboard box versions):
1 Power tool
1 Operating instructions
2.8 Additional items required for operating the tool
B 14/3.3 or B 14/1.6 Li ion battery with C 4/36, C 4/36 ACS or C 4/36 ACS TPS battery charger.
2.9 Li-ion battery charge status and overheating indicator
LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
LED 1
-
-
2.10 Overload and overheating protection
The power tool is equipped with an electronic protection system to prevent overloading and overheating. The
power tool switches itself off automatically in the event of overloading and overheating. After releasing the
control switch, the power tool may not restart immediately when the switch is pressed again (while the power
tool is cooling down).
Printed: 07.07.2013 | Doc-Nr: PUB / 5070682 / 000 / 00
LEDs blink
-
-
-
-
LED 1
LED 1
Charge status C
C 75 %
50 % C < 75 %
25 % C < 50 %
10 % C < 25 %
C < 10 %
Battery overheated
en
17