Hoover Fusion BH53110 Manual Del Usuario página 9

Mounting the Wall Bracket
First, fully assemble the vacuum but do not attach the battery.
Snap the Wall Bracket arm into
the Wall Bracket and screw
into place. Hold the vacuum
against the wall. Position
the Wall Bracket behind the
Handheld so that the hook
holds the vacuum.
1
TIP: The Floor Nozzle must be flat
on the ground for proper wall
mounting.
Store the Vacuum on the Wall
Bracket arm.
4
Set the vacuum aside. Mark the
Wall Anchor locations. Install
the anchors and screw the Wall
Bracket to the wall.
IMPORTANT: Use BOTH screws to
mount the Wall Bracket to wall.
2
Store tools in the storage bag
and hang from the accessory
tool holder.
3
9