Siemens ET 200iSP Información Del Producto página 8

Εnglish A5E41370612-AC
PS Power Supply 24 V DC,
6ES7138-7EA01-0AA0
Product Information Leaflet
This product information leaflet contains important information
about the Power Supply PS DC24V.
Characteristics
• The PS power supply supplies all of the output voltages
required for the ET 200iSP. The output voltages are
electrically isolated from the DC 24V supply voltage and
from each other (those that are connected to the TM-PS-A
/ TM-PS-A UC / TM-PS-B / TM-PS-B UC terminal
submodule) and are intrinsically safe.
• The PS power supply is plugged into the
TM-PS-A / TM-PS-A UC / TM-PS-B / TM-PS-B UC
terminal submodule.
Further information
Further information about the Power Supply PS DC24V is
provided in the "SIMATIC Distributed I/O ET 200iSP"
manual.
These operating instructions are available free-of-charge on
the Internet at:
https://support.industry.siemens.com/cs/ww/en/
Maintenance
The power supply is maintenance-free. You need to send the
power supply to the manufacturing site for repair. Repairs can
only be carried out there.
If problems occur, please contact your local Siemens office:
https://support.industry.siemens.com/cs/ww/en/sc
Εnglish