Descargar Imprimir esta página

KRESS KAC804 Manual Del Usuario página 6

Ocultar thumbs Ver también para KAC804:

Publicidad

Idiomas disponibles

Idiomas disponibles

POSITEC Inc. has established a partnership with
the RBRC Corporation to recycle any Positec
batteries with the RBRC-call2recycle seal. For
environmental protection, please do not discard
batteries in the trash. After the batteries' life cycle is
ended, then please call 1-800-822-8837 for a free
service that will properly dispose of the battery.
OPERATION
INSTRUCTIONS
Recommendations for optimal handling of
the battery
Note:
1.Your battery pack is partly charged and needs
to be fully charged before first use. To ensure full
capacity of the battery, completely charge the
battery in the battery charger before using your
battery in the power tool for the first time.
2. A battery pack will slowly lose its charge when
kept out of the charger or left in an unplugged
charger for a long time. It may need to be recharged
before use.
EN
The CyberPack can be used with a backpack,
please refer to the backpack manual for details.
When over-discharge, over-charge, over-
temperature and low-temperature faults occur while
the battery pack is being charged on the charger or
used on the machine, the user will receive a fault
prompt, and the charger or the machine will stop
charging or working.
The Li-Ion battery can be charged at any time
without reducing its service life. Interrupting the
charging procedure does not damage the battery.
The battery level can be detenmined from the
battery indicator light by pressing the power test
button. Before starting or after use, press the power
test button on the battery pack to check the battery
capacity.
Remarks
LED light
Five green
lights are
illuminated.
Four green
lights are
illuminated.
6
Battery condition
80% ≤ Power level ≤
100%
60% ≤ Power level < 80%
Three green
lights are
illuminated.
Two green
lights are
illuminated.
One green
light is
illuminated.
One green
light is
flashing.
You can see the relevant status of the battery
through the status of the Bluetooth indicator light
and the fault indicator light.
Remarks
Bluetooth indicator
light is illuminated.
Bluetooth indicator
light is not illuminated.
Fault indicator light is
illuminated.
Fault indicator light is
not illuminated.
When the battery pack fails, the fault indicator will
light up, and you can view the specific fault cause
and solution through the APP.
HOW TO CHARGE THE
BATTERY
Refer to the instruction manual for charger.
STORAGE
Store the battery only within a temperature range
between 41~77 °F (5~25°C).
When kept out of the charger or left in an
unplugged charger for a long time, the battery still
reaches a relatively high level.
A significantly reduced working period after
charging indicates that the battery is used and must
be replaced.
40% ≤ Power level < 60%
20% ≤ Power level < 40%
10% ≤ Power level < 20%
0% ≤ Power level < 10%
Battery condition
Bluetooth is connected.
Bluetooth is not
connected.
Battery failure, prohibit
charging and discharging.
It is normal.

Publicidad

loading