Publicidad
Idiomas disponibles
Idiomas disponibles
Neck Brace adjustment
To adjust the size of the brace, remove the two red pins (marked with the word 'pull') on both sides of the
rear thoracic. Once free from the two red pins, pull the thoracic off the brace (6a).
6
a.
There are two sizing slots. These two sets will allow for two different adjustments. Select one set and
position so that the openings on the brace and the openings on the thoracic are lined up (6b). Secure again
by inserting the red pins in the openings (6c).
Optional Brace Strap
7
a.
c.
The brace strap is easily attached through opening the ends of the straps, looping them through the strap
openings and then closing them again (7a & b). Please make sure you have the straps secure on the front
and back of the brace(7c).
®
Copyright © 2021, Leatt
Corporation
b.
b.
Front
GB
c.
Back
5
Publicidad
