Makita DA4030 Manual De Instrucciones página 5

Switch handle mounting positions
2
3
4
► 1. Mark 2. Motor housing 3. Lock button 4. Handle
The switch handle can be rotated to either 90° left
or right to fit your work needs. First, unplug the tool.
Press the lock button and rotate the switch handle until
the mark on the lock button is aligned with that on
the motor housing. The switch handle will be locked in
that position.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing side grip (auxiliary handle)
CAUTION:
• Always be sure that the side grip is installed
securely before operation.
► 1. Side grip
Screw the side grip on the tool securely. The side grip
can be installed on either side of the tool, whichever is
convenient.
1
1
Spade grip
The spade grip can be installed in any position as
shown in the figure. To change the position, loosen the
hex bolts (both sides) with a hex wrench and turn the
spade grip to the desired position. Then tighten the hex
bolts securely. After reposition the grip, return the hex
wrench to the wrench holder.
1
► 1. Spade grip 2. Wrench holder 3. Hex wrench
CAUTION:
• Do not fix the spade grip beyond the limits of the
arrow. Be cautious that your hand is not caught
in the grip. Keep the hand away from the drill
chuck. They can lead to serious accidents.
CAUTION:
• Always be sure that the hex bolts (both sides) of
the spade grip are tightened securely.
5 ENGLISH
2
3