Extremis picnik Serie Manual página 7

7
english
maintenance
POWDER COATED ALUMINIUM
° Clean with lukewarm water and a mild
detergent.
ALUMINIUM WITH HIGH GLOSS
FINISH
° Clean with lukewarm water and a mild
detergent.
° Superficial scratches can be polished out
with a fine polish paste as used on cars. Then
finish with a high gloss polish.
If the damage is still visible, you can have
the entire table repainted at a local car body
shop.
° Never use a high pressure cleaner!
ANODISED ALUMINIUM
° Anodising is a process which increases
the thickness of the natural oxide layer on
the surface of the aluminium. This layer
protects the aluminium from corrosion.
We have chosen not to give the aluminium
any further treatment, as this does not
lengthen its lifespan and is furthermore very
environmentally unfriendly. The material
requires very little maintenance: cleaning
with lukewarm water and a mild detergent
once or twice a year is sufficient.
STAINLESS STEEL
° Stainless steel is not seawater resistant.
Especially in aggressive environments
(maritime climate, chlorine, acid rain, and
aggressive industrial or urban environments)
we recommend that you regularly clean
the stainless steel surfaces. Special cleaning
products for aluminium are readily available
on the market.