HOLL'S Neptune 2 Manual De Instalación página 40

Disconnect the cabin's power supply cable before undertaking any work.
Problems identified
Electric stove does not heat
up.
Sauna light fittings no longer
work
19
MAINTENANCE
Possible reasons
Power supply cable disconnected
The general power supply is cut
Stove is overheat protected.
Bulb not fully engaged
Bulb is defective
The general power supply is cut
Solutions
Check power supply cable connection
Check that the switchboard and wall plug are
working
Refer to the electric stove manual
Check bulb holder and replace if necessary
Replace bulb
Check that the switchboard and wall plug are
working