LEGRAND C2G31013 Manual Del Usuario página 4

HDMI® HDBaseT + 3.5mm, USB-B to A, and RS232 over Cat Extender
Box Transmitter to Box Receiver - 4K 60Hz
Product Overview
Front Panel
Transmitter
① ② ③ ④
F P D
RONT ANEL ESCRIPTION
On: Power is applied to the device.
1 Power LED
Off: No power is applied to the device.
Blinking: The device is working properly.
2 Status LED
Off: The device is not working properly.
On: HDCP protected content is being transmitted.
3 HDCP LED Blinking: Non-HDCP protected content is being transmitted.
Off: No content is being transmitted.
On: HDBT link is normal.
4 Link LED
Off/Blinking: No HDBT link or link error.
Rear Panel
⑤
⑥
R P D
EAR ANEL ESCRIPTION
Connect to the power adapter provided. With PoH function,
5 DC 12V
the transmitter can be powered by the receiver.
6 HDBT OUT Connect to HDBT IN port of receiver.
7 RS232 For RS232 pass-through.
8 HDMI IN Connect to an HDMI source using an HDMI cable.
Audio In: Connect to an audio source.
9 AUDIO IN / OUT
Audio Out: Reserved.
10 USB-B Host Port Connect to a USB-HOST device, such as a PC
2
Transmitter
⑨
⑦ ⑧
(us)
(us)
⑩