Publicidad
Idiomas disponibles
Idiomas disponibles
English
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
Intended Use
The DWST82821 is designed for professional wall charger
mounting applications.
DO nOT let children come into contact with this system.
Supervision is required when inexperienced operators use
this system.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or property damage.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
(Used without word) Indicates a safety related message.
GENERAL SAFETY RULES FOR BATTERY
CHARGER RAIL MOUNT
WARNING: DO NOT alter or modify this product
from the original design or function without
approval from D
fit. Personal injury and or property damage can result
from un‑authorized modifications.
WARNING: To reduce the risk of personal injury,
do not use a damaged D
rail mount. A damaged battery D
rail mount will not support the weight of the battery
charger and battery.
WARNING: To reduce the risk of personal injury,
ensure the battery charger is mounted on the
D
WALT charger rail mount securely before using.
e
1 . Ensure to unplug the power cord of the battery
charger before mounting the charger on the D
charger rail mount.
2 . DO NOT exceed maximum product weight,
including battery charger and battery. See Mounted
Weight Capacity for more information.
3 . Only mount the compatible chargers on the D
battery charger rail mount.
4
WALT. Other than cutting length to
e
WALT battery charger
e
WALT charger
e
Additional Safety Information
WARNING: Never modify this product. Damage or
personal injury could result.
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
•
ANSI S12.6 (S3.19) hearing protection,
•
NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
•
lead from lead‑based paints,
•
crystalline silica from bricks and cement and other
masonry products, and
•
arsenic and chromium from
chemically‑treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
Wear protective clothing and wash exposed areas
•
with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of
harmful chemicals. Direct particles away from face and body.
•
Use the appropriate dust extractor vacuum to remove
the vast majority of static and airborne dust. Failure
to remove static and airborne dust could contaminate the
working environment or pose an increased health risk to
the operator and those in close proximity.
MOUNTED WEIGHT CAPACITY
CAUTION: To reduce the risk of injury, do not
overload the battery charger rail mount.
Do not mount more than 11 lb (5 kg) to the D
charger rail mount.
BATTERY CHARGER COMPATIBILITY
The D
WALT battery charger rail mount is compatible with
e
the following D
DCB115, DCB112, DCB1104, DCB118, DCB1106, DCB1112
and DCB1102.
Assembly
Required Tools and Hardware
WALT
e
You will need to gather a few common tools and hardware.
Always consult your local building code for proper hardware.
•
Safety glasses
•
Screwdriver
WALT
•
M4 x 4 Nail Screws
e
•
ST5 x 12 Screws
WALT battery chargers:
e
2
3
WALT battery
e
Publicidad
