Publicidad
Idiomas disponibles
Idiomas disponibles
GARANT XConnect
de
2
POWER LED (green)
3
CONNECT LED (orange)
bg
3.1.
NAMEPLATE
da
en
fi
fr
2
3
4
it
hr
lt
nl
1
Product
no
2
Manufacturer's address
3
Product number
pl
4
Serial number
4.
Commissioning
pt
i
Before commissioning the XConnect on the machine tool, the XConnect must be checked for correct assignment to the ma-
ro
chine control.
4.1.
SIEMENS CONNECTION
B
ru
1. Connect XConnect to the computer.
2. Open the file "CONFIG.TXT" [XCONNECT(F:)/INFO/CONFIG.TXT].
sv
»
The following must be written on the second line here: SIEMENS ; SIEMENS | HEIDENHAIN
3. If this is not the case, change from HEIDENHAIN to SIEMENS.
4. Save changed file.
sk
»
The setting will be applied.
»
Siemens connection set up.
sl
4.2.
HEIDENHAIN CONNECTION
B
es
1. Connect XConnect to the computer.
2. Open the file "CONFIG.TXT" [XCONNECT(F:)/INFO/CONFIG.TXT].
»
The following must be written on the second line here: HEIDENHAIN ; SIEMENS | HEIDENHAIN
cs
3. If this is not the case, change from SIEMENS to HEIDENHAIN.
4. Save changed file.
»
The setting will be applied.
hu
»
Heidenhain connection set up.
14
1
5
5
Casing
6
7
5
Country of manufacture
6
Conformity
7
Disposal
Publicidad
