Publicidad
Idiomas disponibles
Idiomas disponibles
EN
– Secure the base plate
(2)
to the wall with the screws
wall plugs
(5)
provided.
5
2
Connecting the zone valve (optional)
The ZONE VALVE , which is not supplied by Sime , is used to man-
age the opening of the space heating or cooling circuit of the
zone where it is installed.
m
WARNING
The electrical connections must conform to
the wiring diagram provided by the manu-
facturer of the boiler and must be made by
the installer.
(4)
and
To connect the zone valve to the room sensor, proceed as fol-
lows:
– Remove the cover
– Connect the cable
(A)
and put the cover back on (6).
7
4
m
WARNING
Make sure that there is no excess cable be-
tween the base plate
(3).
(6)
(7)
of the zone valve to the terminal block
A
(2)
and the user interface
6
23
Publicidad
