Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4.3.2
Unpairing and/or deleting radio connection
data (return to factory data)
To reset the RF module, press the
cessed through the relevant opening along the bottom edge,
and hold it for at least 5".
a
WARNING
Be careful not to use a sharp and metal tool
to avoid damaging the Pairing and Reset but-
ton (4).
Once the procedure terminates, the screen for verifying the
pairing and communication status with the respective remote
control will appear.
1 2 3 4 5 6 7
H
(4)
button, which can be ac-
4
C°
C°
M
4.4
Functions
4.4.1
Zone mode change
Pressing the
@
key allows for switching to the Mode Change
menu. In this menu the current mode flashes. The
keys allow for switching between the INFINITE MANUAL, AU-
TOMATIC and OFF modes cyclically.
The corresponding icons will flash on the display. The select-
ed mode must be confirmed with the
previous mode is restored if the
system remains inactive for
8
If the system is in "Stand-by" mode, modifying the zone's mode
implies the activation of the HEATING ONLY mode.
If the system is in DHW ONLY mode, modifying the zone's mode
implies the activation of the COMBINED mode.
1
2
1 2 3 4 5 6 7
1 2 3 4 5 6 7
C°
C°
H
M
Visualisation in INFINITE MANUAL mode
1
Visualisation in AUTOMATIC mode
2
OFF
3
[
and
@
key. Alternatively, the
P
key is pressed or if the
sec.
3
1 2 3 4 5 6 7
C°
C°
C°
C°
H
M
H
M
]
29
Publicidad
