LUBRICATION
Transaxle Fluid Change
1.
2.
3.
4.
5.
65 in/lbs. each.
6.
7.
to disposal. Place used oil in appropriate
containers and dispose of it in accordance
8.
9.
10. Fill with 20W50 motor oil until oil just appears
30
11.
180 in./lbs.
12.
additional ounces).
13.
careful to not overtighten.
Transmission Purging
Purge procedures must be implemented if
maintenance or when more oil has been added to
•
•
operation.
•
• Shortened component life.
outlined above.
normal operating conditions.
See Moving Machine By Hand in the Operation
1.
2.
directional control in both forward and reverse
directions (5 or 6 times). As air is purged from
the unit, the oil level will drop.
3.
control in both forward and reverse directions
4.
forward and reverse at normal speeds, the
5. After the vehicle has been used two times, the