Publicidad
Idiomas disponibles
Idiomas disponibles
3.3 - General Recommendations
Always make sure the following points
are observed:
- Tightening of bolts, nuts and clamps
after the first few hours of use, and
retightening at every 50 hours of
operation;
- Clean out the spray circuit at the
end of every work day following the
description given below;
- Clean all filters in the spray circuit, as
well as the tips to prevent clogging. Use
a soft bristle brush or compressed air;
- Corrosive products with liquid
fertilizers collaborate to deteriorating the
equipment, clean well any metal parts
that may come in contact with them;
- Carry out greasing, oil and filter
changes in the recommended
frequency;
ago/2010
3.0 - CLEANING AND STORING THE EQUIPMENT
- Check tire pressure and inspect
tightening of wheel nuts;
- From time to time check/gauge the
spray tips;
- Inspect the overall condition of the
hoses, deal with any leaks;
- In the period between harvests, store
your sprayer in a safe place, protected
from the weather and far from fertilizers
and / or other volatile corrosive
products;
Attention:
Never wash your sprayer in
streams, rivers or lakes or
sources of drinking water to
avoid contamination.
self-propelled mechanical sprayer BOXER
167
Publicidad
