Optika Italy H Serie Manual De Instrucciones página 10

7.1.5 Connecting multi-cameras to a router via LAN port/WLAN STA mode for network application
In LAN/WLAN STA mode, the camera connects to router LAN/WLAN by LAN port / WLAN STA mode.
If a router with LAN/WLAN capability is used, users could connect the router with Ethernet cable/WLAN and control the
camera.
1. When connecting via LAN the connection and configuration are just the same as in Sec. 71.1. or 7.1.4, but here, users
need to check DHCP.
• If Multicast is disabled or is not supported, users should only select Unicast.
• If Multicast is supported by the network, users could select Multicast to achieve a better performance, especially in the
case that multi-users connect to the same camera.
• In addition, please guarantee that the broadcasting function is enabled in the network.
Fig. 5 - LAN configuration
Page 10